Genesys User Manual - AMS Neve

MTC Ethernet MIDI
▶ Select the MIDI channel you wish the MIDI Timecode to be accepted by
the console on.
This must match the settings on your DAW.
As Was Snapshot
In the background while you are working, the console takes a snapshot of
all settings, controls and states, including audio routing.
This option sets the interval at which that snapshot is taken, selectable in
5 minute intervals from 5 minutes to 1 hour.
If you have the As Was option selected in the main Settings screen,
then:
• it is this snapshot that is sent to the console when it powers up, and
• every time you shut the computer down, you will be asked if you wish
to update this snapshot.
• Click Yes or No as desired.
Console Debug Window
This is for use by AMS Neve only.
FireWire Setup
For setup and operation of the AD/DA system, please refer to the
FireWire section on page 123 of the user manual.
- 108 -