Genesys User Manual - AMS Neve

MASTER SEL Section
LOCK
▶ Lights red and locks the MIC, LN, DAW, SWP & MIX buttons (plus the
DLN led) to their current state, preventing them from accidental
operation.
• LOCK needs to be held for 3 seconds before locking or unlocking.
• Pressing LOCK and then RTE SEL together will put the panel into
Master SEL mode.
MIC
Lights red and cancels other selections.
It will change the audio feed to the Channel path by switching all the
modules to Mic input, and this will be displayed by a red led on each
module.
MIC is interlocked with MIX to clearly define two different states the
console can be in: Record (MIC) or Mixdown (MIX).
NB:
MIC is automatically switched off is MIX is selected and is not
reinstated.
LN
Lights green and cancels all other selections.
It will change the audio feed to the Channel path by switching all the
modules to Line input, and this will be displayed by a green led on each
module.
NB:
LN is automatically switched off if MIX is selected and not
reinstated.
DAW
Lights green and cancels other selections.
It will change the audio feed to the Channel path by switching all the
modules to the workstation, and the green DAW led will be lit on each
module.
NB:
DAW is automatically switched On, if MIX is selected and not
reinstated.
The DLN led will only
light if a AD/DA
cassette has been
detected.
If there is no cassette,
it will not be possible
to turn the other CH
DLN selection on
either.
DLN led
The D-LINE Inputs (and it's led) are turned on when the three interlocked
options above are all turned off. DLN feeds the Neve FireWire to all of the
channel inputs, indicated by the blue DLN led being lit on each module.
This led will only light if an optional AD/DA card is fitted and has been
detected.
SWP
Lights blue and turns on the SWP led on each channel.
- 63 -