Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
parameters the DAW control may assign several pages to allow the plugins<br />
to be controlled by the 4 encoders.<br />
• F5 toggles the COMPARE mode for the selected plug-in.<br />
The value can be changed by turning and/or pressing the encoders and is<br />
shown on screen in the bottom row of 4 text boxes. The top-most row of<br />
boxes show the bypass, track being controlled and compare parameters.<br />
The middle row of boxes show the parameter being controlled by the<br />
encoders.<br />
FADS and BANKS<br />
FADS allows a large session with lots of tracks to be seamlessly controlled<br />
from <strong>Genesys</strong>.<br />
▶ Press FADS (the button will light).<br />
▶ Use the ◀ & ▶ buttons to move the DAW tracks up/down the console<br />
surface a single track at a time.<br />
▶ If the BANKS button is lit, using the ◀ & ▶ buttons will move the DAW<br />
tracks up/down the console surface eight tracks at a time.<br />
The tracks currently under control will be displayed on screen.<br />
AUTO<br />
AUTO allows the Automation Modes to be changed on any of the DAW<br />
tracks by using the fader SEL buttons.<br />
▶ Press the AUTO button<br />
▶ Now press the fader SEL button on the console to change the<br />
automation mode.<br />
▶ Pressing the fader SEL button repeated will cycle through the<br />
automation modes in your DAW for that track.<br />
Turn off AUTO when not in use as the fader SEL buttons are used to<br />
control these functions and you may inadvertently change something.<br />
CHAN<br />
CHAN puts the DAW tracks into Track Arm (Record Enable) mode and<br />
tracks can be armed on/off by using the fader SEL buttons.<br />
▶ Press the CHAN button<br />
▶ Now press the fader SEL button on the console to put the track into<br />
armed mode/record enabled.<br />
▶ Pressing the fader SEL button repeated will toggle (on/off) the track<br />
arm/record enable mode in your DAW for that track.<br />
Turn off CHAN when not in use as the fader SEL buttons are used to<br />
control these functions and you may inadvertently change something.<br />
◀ and ▶ Buttons<br />
They are used to scroll through the available DAW tracks and parameters<br />
and are used to set which tracks the 4 DAW encoders are controlling.<br />
- 172 -
Change language