Genesys User Manual - AMS Neve

More documents

Recommendations

Info

IMPORTANT NOTICE THE GENESYS CONSOLE IS SUPPLIED WITH A 3-CORE AC POWER CABLE APPLICABLE TO THE REGION IT IS TO BE OPERATED IN, AND MUST BE CONNECTED TO A 3-PIN EARTHED SUPPLY. IF A REPLACEMENT CABLE IS USED, THEN THE EARTH FROM THE MAINS SOCKET OR TECHNICAL EARTH TO THE CONSOLE MUST BE MAINTAINED. IF ONLY A 2-PIN (NO EARTH) SUPPLY IS AVAILABLE, THEN THE GENESYS CONSOLE MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN TO ENSURE THAT THE CONSOLE METALWORK IS PERMANENTLY EARTHED. THE CONSOLE SHOULD ONLY BE POWERED FROM A SINGLE-PHASE SUPPLY WITH THE NEUTRAL CONDUCTOR AT EARTH POTENTIAL. FAILURE TO FOLLOW THESE PROCEDURES AND RECOMMENDATIONS COULD INVALIDATE THE MANUFACTURER'S WARRANTY - 6 -
Console Overview A 16 fader console as shown here will have: • Six Auxes (four mono, two stereo) • A stereo mix buss • Two stereo monitoring speaker sets • Two 5.1 monitoring speaker sets • 16 channels of <strong>Neve</strong> mic/line amplifiers • 32 channels of DAW mixing • 8 mono Groups • 1 Main output • 4 stereo effects returns • 16 Channel, 8 Track or 2 Track metering • 2 Cue mixes • Full talkback capability • Internal power supply units • Expandable to 64 channels, either in straight or wedge formation • USB flash drive for Store, Load & Reset functionality • Hands-on DAW control for Pro Tools, Nuendo & more • Full console instant Reset • Digitally controlled EQ and Dynamics (1084 EQ circuitry and 88R style Dynamics) • Motorised 8T and Main Output faders with DAW control • 16 CH Analogue DAW Monitor • Optional Recall module so all rotary control positions can be stored and reset • Optional EQ / Dynamics cassettes (8 per card) • Optional AD/DA cassette to provide digital Ins/Outs (8 per card) • Optional Digital Monitoring cassette providing I/O for Aux, 8T, Main Mix and monitoring • Optional motorised CH Faders with DAW Control - 7 -
Page 1 and 2: GENESYS User Manual Issue 1.13.1 Ve
Page 3 and 4: Servicing is required when the appa
Page 5: Health & Safety Notice FOR YOUR OWN
Page 9 and 10: Table of Contents IMPORTANT SAFTY I
Page 11 and 12: MONO...............................
Page 13 and 14: PC.................................
Page 15 and 16: About this manual This manual consi
Page 17 and 18: The Computer Cassette IMPORTANT: Be
Page 19 and 20: Optional Console Hardware EQ Casset
Page 21 and 22: Channels Digital Converter System (
Page 23 and 24: Optional Software Packages Automati
Page 25 and 26: Wiring connections / Setup for DAW
Page 27 and 28: DAW Computer Settings Mac OS X (DAW
Page 29 and 30: After installation the driver ports
Page 31 and 32: There are two audio connectors on e
Page 33 and 34: Master SEL mode ▶ Master SEL mode
Page 35 and 36: An Overview of the Genesys Signal F
Page 37 and 38: Recording in Stereo ▶ Before powe
Page 39 and 40: Mixing In Surround If you have LCR
Page 41 and 42: Surround system. ▶ Ensure that th
Page 43 and 44: The speaker button will light when
Page 45 and 46: will be able to swap between listen
Page 47 and 48: 90Hz filter Switches a hi pass filt
Page 49 and 50: Channel and Monitor Path Drag and D
Page 51 and 52: DIRECT OUTPUT Section Master Level
Page 53 and 54: CH Allows you to send the Channel i
Page 55 and 56: REVERB RETURNS / AUX MASTERS Sectio
Page 57 and 58:
AUX MASTERS Section Master Send Set
Page 59 and 60:
Master SEL mode on the 8T AUXES Sec
Page 61 and 62:
2T/MIX Sends tone to the 2T and Mix
Page 63 and 64:
MASTER SEL Section LOCK ▶ Lights
Page 65 and 66:
Momentary Solo mode is also availab
Page 67 and 68:
ROUTE SEL Section This section enab
Page 69 and 70:
▶ For later LCR/Stereo channel st
Page 71 and 72:
CUE MIX Section Each of the Cue mix
Page 73 and 74:
CONTROL ROOM MONITOR Section Sets t
Page 75 and 76:
EXT ▶ Will light yellow when sele
Page 77 and 78:
It is possible to tie a set of loud
Page 79 and 80:
• 30% indicates you are listening
Page 81 and 82:
To Lock Relative Levels Within a Lo
Page 83 and 84:
setups using LOCK/RTE SEL, can be s
Page 85 and 86:
DAW / CONSOLE CONTROL Screen The Mo
Page 87 and 88:
have the following functions: Encod
Page 89 and 90:
8T Faders The 8T faders can either
Page 91 and 92:
Meterbridge CHANNEL Meters Each fad
Page 93 and 94:
of each meter. PPM Sets all meter i
Page 95 and 96:
Master Screen The SETUP screen allo
Page 97 and 98:
At the bottom of the EQ screen are
Page 99 and 100:
DYN Only functions if at least one
Page 101 and 102:
Gate/Expander The Dynamics screen i
Page 103 and 104:
DAW Setup and control for the Digit
Page 105 and 106:
Speaker Trims ▶ Click the speaker
Page 107 and 108:
NB: 1 - When setting levels using t
Page 109 and 110:
FILING Provides facility to Save an
Page 111 and 112:
RTE This screen is a graphic repres
Page 113 and 114:
RECALL Recall Overview Recall is an
Page 115 and 116:
Saving a Recall file In effect, a R
Page 117 and 118:
Hold mode / Auto mode The above pro
Page 119 and 120:
Important Information There are two
Page 121 and 122:
This is a two-function button, and
Page 123 and 124:
AD/DA & FireWire System Digital Con
Page 125 and 126:
Channel Master Overview The Channel
Page 127 and 128:
Serial In / Out Provided for daisy-
Page 129 and 130:
Channel Slave Overview The Slave AD
Page 131 and 132:
Monitor Section Overview This card
Page 133 and 134:
Switchblock Contains 4 switches, th
Page 135 and 136:
This zip file contains a single dri
Page 137 and 138:
1 - 8 9 - 16 17 - 24 25 - 32 Monito
Page 139 and 140:
Monitor card This card will always
Page 141 and 142:
CAT 5 connections on systems withou
Page 143 and 144:
FireWire From DAW A B A B A B A B A
Page 145 and 146:
The install will start and the prog
Page 147 and 148:
Software Operation ▶ When the Gen
Page 149 and 150:
andwidth is limited and the capabil
Page 151 and 152:
Channels DLINE Input This covers wh
Page 153 and 154:
⌥ On the console surface, the dig
Page 155 and 156:
Windows 7 Drivers This section only
Page 157 and 158:
Recommended OHCI Chipsets To get th
Page 159 and 160:
Channel Controls Each channel can b
Page 161 and 162:
Rear Connectors / Pin-out informati
Page 163 and 164:
Female XLR 3 9 Insert IN 3 hot 2 3
Page 165 and 166:
Connecting the 4081 to Genesys with
Page 167 and 168:
▶ Click Settings Within Software
Page 169 and 170:
Digital Audio Workstation (DAW) Con
Page 171 and 172:
encoder, it will toggle the selecte
Page 173 and 174:
TRANSPORT The Transport buttons on
Page 175 and 176:
Control and click Add. This will ad
Page 177 and 178:
switched over to showing the meteri
Page 179 and 180:
y looking at Logic Pro and Genesys
Page 181 and 182:
already) to indicate you have selec
Page 183 and 184:
automation mode. ▶ Pressing the f
Page 185 and 186:
▶ In the left Devices column sele
Page 187 and 188:
DAW Metering (Genesys software ) Wh
Page 189 and 190:
▶ F1, F2 or the fader SEL buttons
Page 191 and 192:
◀ and ▶ Buttons They are used t
Page 193 and 194:
▶ A pop-up will appear on screen
Page 195 and 196:
USB Recovery - Complete Software Re
Page 197 and 198:
Integrated Peripherals Menu OnChip
Page 199 and 200:
The Recovery Process ▶ Once the s
Page 201 and 202:
Audio Monitoring Boards Accessible
Page 203 and 204:
Monitor Board 2 (Mix Insert) This b
Page 205 and 206:
Genesys Audio Specification Record
Page 207 and 208:
Genesys Physical Information Dimens
Page 209 and 210:
1 Screen 2 Hi 3 Lo RS 232 9-pin D-t
Page 211 and 212:
Loudspeaker Outputs A & M1 (25-way
Page 213 and 214:
Console Outputs - 8Ts (25-way D-typ
Page 215 and 216:
Channel Section Connectors As shown
Page 217 and 218:
Channel Insert 2 Send (25-way D-typ
Page 219 and 220:
Master AD/DA Channels cassette, SMN
Page 221 and 222:
Slave AD/DA Channels cassette AES R
Page 223 and 224:
AES TX / AUX / 2T L & R / MIX L & R
Page 225 and 226:
General Fuses - Ratings & Location
Page 227 and 228:
Alphabetical Index 1 1/2...........
Page 229 and 230:
I/P 2..............................
Page 231 and 232:
To DAW via FireWire................
show all

Genesys User Manual - AMS Neve

Create successful ePaper yourself

Delete template?

Save as template?