Genesys User Manual - AMS Neve

8T AUXES Section
ISO
Isolates the 8T from the Solo system, so that when any other 8T SOLO
(or CH or MON solo as link-selected in the Settings screen), is detected
on the console, that 8T path is not cut.
SEL
As there is only a single SEL button for a pair of 8T paths:
• A fast single-press of SEL will enable the odd numbered 8T
routing.
• A fast double-press of SEL will enable the even numbered 8T
routing.
• SEL and the adjacent PRE button pressed together will enable the
Rev Return routing.
INS
▶ Switches the 8T Insert On/Off.
PRE
▶ Sets whether the 8T Insert is Pre- or Post- the 8T fader.
It also works in conjunction with SEL to set the Reverb routing (see
above).
The led will be lit when set to PRE, and unlit when set to POST.
- 58 -