Genesys User Manual - AMS Neve

▶ A pop-up will appear on screen (left) to inform you that the system is
checking for updates.
If the latest version of the software is already installed, a window will
appear informing you of this (left).
▶ Click OK.
You do not need to do anything further. You may check again for updates
at a later time.
If an update is found, a window will appear, showing the current version
installed i.e. V3.3 Build 7, and also the version which is available to
download.
IMPORTANT:
Ensure you read through the Release Notes shown in the window.
Firmware updates for the console may also be required after the
new software is installed. After new software installation is
complete, it is recommended that before updating firmware, you
take a snapshot of the console settings, click Filing then Save.
▶ Click Yes to download the new version.
A pop-up will appear on your screen showing the progress of the
download.
Once complete, the window (left) will appear.
Note: The Genesys software will close in order for the new update to
install.
▶ Click Yes to proceed with the installation process.
Genesys software will now close automatically.
The Genesys Software Installation Wizard
The Genesys Setup Wizard will now guide you through the installation of
the new software.
▶ Click Next.
IMPORTANT:
Ensure you follow instructions given by the installer. Do NOT
change any options or settings provided by the installer. Use the
defaults options. If for any reason you need to change the default
options please contact AMS Neve for assistance.
▶ When the window (left) appears, Full Installation should be already
selected in the drop down menu. If this is not the case, select Full
Installation from the drop down menu.
▶ The Genesys Applications option tick-box will be selected by default.
If this is not the case, select Genesys Applications by clicking the tickbox.
▶ Click Next to continue with installation.
The installer will now update your Genesys software to the latest version.
- 193 -