Genesys User Manual - AMS Neve

This is a two-function button, and once clicked, it will change to showing
Panel Display, which is the default display when the System
Diagnostics screen is first opened.
Restart Software
Restarts the Genesys software.
You will be asked to confirm your actions.
▶ Click Yes.
The Genesys software will reboot.
Restart PC
Restarts the Genesys computer without the need for power-cycling the
console.
You will be asked to confirm your actions.
▶ Click Yes.
The Genesys computer will power-down and then reboot.
Turn Off Console
Shuts down the Genesys computer in the correct manner, so that the
power can be safely removed from the console.
You will be asked to confirm your actions.
▶ Click Yes.
The computer will shut down in the correct manner.
Exit To Windows
Click this button to exit all of the Genesys software and be returned to the
Windows desktop.
You will be asked to confirm your actions.
▶ Click Yes.
If you have the As Was option selected in Settings / Power Up, then
you will be presented with a second screen that asks you if you wish to
update the console snapshot.
▶ Click Yes or No.
Clicking Yes means that when the console boots up, it will do so in exactly
the same condition as when it was switched off (with the same routing,
pre/post states, EQ and DYN parameters etc).
If you click No, then you will be returned to the Windows Desktop and any
settings that have changed since the last automatic snapshot was taken
will be lost.
The system is not designed to run without the computer powered-up, it should
always be in constant communication with the console surface.
- 121 -