You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REV RETURN Meters<br />
Each of the Rev Return meters has 2 scales:<br />
• VU scale, displayed to the left<br />
• dBu scale, displayed to the right<br />
MIX L/R<br />
Indicates whether the 8T is feeding the L and R of the Main mix.<br />
SIG<br />
Lights depending on the threshold of the SIG PRES rotary control on the<br />
Master Select panel.<br />
The bottom four leds across the pair of meters indicates how the Rev<br />
Return is feeding the L & R Main Mix or 8T Mix.<br />
NB:<br />
There are two 8T leds that indicate whether the Rev Return is contributing<br />
to the 8T busses<br />
• Rev 1 can only contribute to 8T 1 & 2 (as shown left)<br />
• Rev 2 can only contribute to 8T 3 & 4<br />
• Rev 3 can only contribute to 8T 5 & 6<br />
• Rev 4 can only contribute to 8T 7 & 8<br />
MASTER METER Section<br />
The selection of the Metering buttons is remembered and reinstated each<br />
time on boot-up<br />
DAW<br />
Lights when the 8T meters are being fed from the DAW metering.<br />
The button itself has no intrinsic function and is for display only.<br />
SOLO<br />
This button will flash whenever a Solo (either AFL or PFL) is detected<br />
anywhere on the console.<br />
This display is for indication only.<br />
USB<br />
USB port for a flash drive so data can be quickly backed up or restored.<br />
Talkback Mic<br />
The Talkback Mic is situated on the Meterbridge for optimum acoustic<br />
isolation.<br />
The Metering Options buttons apply their functions globally across all<br />
metering on the console:<br />
VU<br />
Sets all meter information to display in VU, and uses the scale to the left<br />
- 92 -
Change language