You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DAW / CONSOLE CONTROL Screen<br />
The Monitor Panel has 18 dedicated buttons with fixed functions, plus 4<br />
'soft' rotary encoders whose function changes depending on what is<br />
selected elsewhere on the console.<br />
For the purposes of this manual, they are numbered (from left to right) 1<br />
to 4.<br />
Each of these 4 free-running encoders has a push On/Off switch<br />
associated with the rotary control.<br />
None of these four push-buttons will have a function unless either you are<br />
in DAW mode, and control has been established between the DAW and<br />
<strong>Genesys</strong>, or you are set to controlling the EQ, Dynamics or 2T.<br />
EQ<br />
Please see the section on EQ on page 96.<br />
DYN<br />
Please see section on DYN on page 99.<br />
2TRK<br />
The screen on the left shows the page that will open when working in<br />
Group mode.<br />
▶ It is possible to turn each 2T On and Off via this page by clicking<br />
underneath the relevant 2T, 2T output ON/OFF button.<br />
▶ Each 2T also has +/-10 dB of trim available, which is set using the<br />
scroll arrows next to each Trim field.<br />
▶ It is also possible to set the overall 2T output level.<br />
This ranges from –∞ to 0dB.<br />
This screen will also show whether you are working in Group mode or<br />
5.1 mode Mode (displayed left) and whether the 2Ts are fed Pre- or<br />
Post- fader (displayed right).<br />
Control of the 2Trk functions is only via the software screen. Control with<br />
the four Monitor Panel encoders (located at the bottom of the panel) will<br />
be implemented in a future software release.<br />
- 85 -
Change language