Genesys User Manual - AMS Neve

Monitor Board 2 (Mix Insert)
This board contains the Left and Right sends and returns for the Main Mix
Insert.
It also contains the Insert Mix Left & Right Sends.
This is where the IMR Insert Send can be patched across the Main Mix
and the Return can be mixed into the Main Mix signal to allow variable
level parallel processing.
Monitor Board 1 (Mix Output)
This board has 2 XLRs for the Main Mix outputs.
It also contains 2 jack sockets that carry the Left & Right Outputs of the
2T mix.
At the bottom of the board, there are 2 jack sockets, one of which carries
the Oscillator / Slate / Pink noise output; another which carries the
console Talkback signal.
Rev Return 4
The Rev Return 4 board contains the Rev Returns inputs for Rev 4, but
also the Insert Mix Return Left and Right jack sockets (the Sends are on
Mon Board 2 above).
- 203 -