You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
At the bottom of the EQ screen are 5 function buttons, and these<br />
correspond directly to the F1 to F5 buttons underneath the EQ encoders.<br />
F1 – Bypass<br />
Allows you to audition the audio with and without the EQ in circuit.<br />
When bypassed, the yellow Bypass led will flash and the Bypass button<br />
on screen will light solid, and the F1 button above the EQ encoders will<br />
also light solid yellow.<br />
F2 – Copy<br />
Copies the current EQ settings (levels, frequencies, on/off state) onto the<br />
EQ clipboard, so it can be pasted to EQs on other paths.<br />
F3 – Paste<br />
Copies the contents of the clipboard to the currently selected EQ.<br />
F4 - Setup Links<br />
Puts the desk in Link Setup mode, so EQs can be linked together.<br />
F5 - Show Links<br />
This is an interrogation mode which temporarily shows which EQs are in a<br />
link.<br />
This feature is non-latching and only works as a momentary press.<br />
To create a link of EQs<br />
▶ Press the F4 button or click Setup Links on-screen.<br />
▶ Press the channel SEL button on the channel that you wish to be the<br />
first EQ in the link (the SEL button will flash to indicate this).<br />
▶ Press other SEL buttons to add those EQs into the same link.<br />
As you do so, the the EQ settings from the first EQ selected will be copied<br />
to those EQs as they are added (levels, frequencies, on/off state).<br />
This will overwrite any settings that may currently be there (the channel<br />
SEL buttons will light solid to show they have been added to the link).<br />
▶ Once all the required EQs have been linked, press the F4 button or click<br />
Setup Links on-screen to exit Link Setup mode.<br />
NB:<br />
• An EQ can only form part of one link.<br />
• There is no limit to the number of EQ links that can be created,<br />
nor to the number of EQs that may be part of that link.<br />
• EQ links can be set across multiple EQ cards, they are not limited<br />
to just within one 8-fader section of the desk.<br />
• EQ links form part of the console snapshot that is taken in the<br />
background, and if the option is set in System, this will load when<br />
the desk is rebooted.<br />
• The EQ links form part of any Recall Stores created, and any/all<br />
the EQ links will be recalled when the store is recalled.<br />
- 97 -
Change language