Genesys User Manual - AMS Neve

Meterbridge
CHANNEL Meters
Each fader strip meter has 2 scales:
• VU scale, displayed to the left
• dBu scale, displayed to the right
Beneath this, a bank of 15 leds displays the following information:
MIX
Indicates whether the Monitor path or Channel path is contributing to the
L and R of the Main Mix.
MTR
The MTR led indicates whether the meter is sourced from the CH I/P,
DAW Send or DAW Return.
8T 1 to 8T 8 leds
For LCR channel strips
In it's default state, these leds indicate which of the 8T busses the
Channel Input is routed to.
▶ When the routing is interrogated (by pressing the >8T button at the
bottom of the channel strip), these leds will indicate which of the 8T
busses the Monitor Input is routed to for the length of time the button is
pressed.
For Stereo channel strips
Indicates whether the Channel or Monitor path is being sent to each of the
8T busses.
SIG
The SIG (Signal Presence) led lights depending on the threshold of the
SIG PRES rotary control on the Master Select panel.
GR
The GR (Gain Reduction) led lights to show any compression that may be
applied to the path.
It is a tri-state led and will light either:
• Green (light compression)
• Orange (medium), or
• Red (heavy)
- 91 -