Genesys User Manual - AMS Neve

⌥
On the console surface, the digital externals are selected into the
monitoring system by double-pressing the EXT 2 button (first making
sure you have selected EXT just to the right).
Only once both of these buttons are lit, will the adjacent D-EXT blue led
light to show you are monitoring the digital externals.
To AES Transmitters
All of these paths that feed into the AES Transmitters will be in circuit all
of the time, and require no user intervention.
• 8Ts 1 – 8 (sent in pairs)
• AUX 1 & 2 (sent as a pair), 3 & 4 (sent as a pair), 5 (L & R), 6 (L & R)
• 2T L/R (sent as a pair)
• MIX L/R (sent as a pair)
This screen is for information only and contains no settable elements.
AES Receivers Sample Rate Converters
▶ Untick the D-EXT 5.1 Input box to disable the automatic sample rate
converters on all the external 6-wide digital inputs into the monitoring
system.
By default, these converters will be ticked and therefore in circuit without
any user intervention.
- 153 -