Genesys User Manual - AMS Neve

Serial 1 , 2 & 3
(CAT5)
Should only ever be connected to the port of the same name on this card's corresponding Slave card,
using standard off-the-shelf CAT5 cables.
Serial 1 goes to Serial 1 and so on.
Serial IN & OUT
(CAT5)
Used for daisy chaining communications between all the AD/DA cards in the console.
FireWire 1 & 2
(J 14 and J 15)
1 Power Voltage VP
2 Power Ground VG
3 TPB 0 -
4 TPB 0 +
5 TPA 0 -
6 TPA 0 +
7 Shield 1
8 Shield 2
- 220 -