Genesys User Manual - AMS Neve

To Interrogate EQ Links
▶ Press (and hold) the F5 button or click (and hold) on the Show Links
button on screen.
The channel SEL buttons will light to show those EQs that form part of a
link.
On screen, the currently displayed channel will also show which EQs it is
linked to by displaying those channels in a drop-down list to the right of
the screen.
▶ Once interrogated, release the F5 button / mouse button.
To Copy EQ Settings From One Path To Another
This allows EQ settings to be copied from one channel to another, but
without creating a subsequent link between all controls.
This is typically used for copying EQs from the left side of a stereo path to
the right.
▶ Call the EQ you wish to copy from on-screen by pressing it's Channel
SEL button.
▶ Press the F2 button (or click Copy on-screen)
▶ Using the channel SEL buttons, call the EQ you wish to copy to onscreen.
▶ Press the F3 button (or click Paste on-screen)
All the EQ settings will be copied from the first EQ to the second, and a
confirmation message will be shown on-screen.
NB:
These settings will remain on the clipboard should you need to paste them
to other paths.
- 98 -