Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
this removes the plug-in. Keep turning the Ch V-Pot clockwise slowly onenotch<br />
at a time, and select a plug-in, i.e. Fat EQ. This will be shown on<br />
the <strong>Genesys</strong> software as you change the plug-in selection.<br />
▶ Press the Ch V-Pot (like you would do to a push-button) and the<br />
selected plug-in will be set. Confirm this by looking at Logic Pro for track<br />
1, Insert slot 1.<br />
▶ After plug-in selection the DAW control changes to Plug-ins / Inserts<br />
Channel View (Editor)... mode automatically. The <strong>Genesys</strong> software<br />
will display this mode.<br />
▶ All the plug-in parameters will be laid out across the console surface<br />
(DAW assigned faders/Ch V-Pots only).<br />
▶ Press F3 or F4 to shift the plug-in parameters up/down the console<br />
surface, allowing you to edit all parameters associated with the plug-in.<br />
▶ Using the Ch V-Pots you can change the parameters associated with the<br />
plug-in.<br />
▶ Press the PLI button again to return to Mixer View mode. When you<br />
press the PLI button the plug-ins window in Logic will automatically close.<br />
▶ Press F1 or F2 to change the plug-in slot.<br />
▶ In a similar way you can choose a plug-in slot, change the plug-in<br />
selection, and edit the parameters for all other DAW tracks.<br />
▶ Press F5 and FLIP should now be on. With FLIP on the <strong>Genesys</strong> faders<br />
will now have the same functionality as the Ch V-Pots.<br />
▶ If you do not press the Ch V-Pot after selecting a plug-in to set it,<br />
regardless of the FLIP mode, any changes you have made will be lost<br />
when you change another parameter or plug-in slot. So always remember<br />
to press the Ch V-Pot after changing the plug-in selection.<br />
▶ Once you have finished editing a plug-ins parameters, always press the<br />
PLI button again to return to Mixer View mode to either choose a new<br />
plug-in or edit a plug-in on a different track or slot.<br />
▶ From the Mixer View you must press the Ch V-Pot to edit a preselected<br />
plug-ins parameters.<br />
FADS and BANKS<br />
FADS allows a large session with lots of tracks to be seamlessly controlled<br />
from <strong>Genesys</strong>.<br />
▶ Press FADS (the button will light).<br />
▶ Use the ◀ & ▶ buttons to move the DAW tracks up/down the console<br />
surface a single track at a time.<br />
▶ If the BANKS button is lit, using the ◀ & ▶ buttons will move the DAW<br />
tracks up/down the console surface eight tracks at a time.<br />
The tracks currently under control will be displayed on screen.<br />
AUTO<br />
AUTO allows the Automation Modes to be changed on any of the DAW<br />
tracks by using the fader SEL buttons.<br />
▶ Press the AUTO button<br />
▶ Now press the fader SEL button on the console to change the<br />
- 182 -
Change language