You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Channel and Monitor Path Drag and Drop Order Processing (ORD Button)<br />
You can manually control the channel processing order using the ORD<br />
button on the Channels to set/show the order processing of the<br />
EQ/DYN/INS1/INS2 (elements).<br />
However, it is also possible to set the processing order by using the click,<br />
drag and drop method as well.<br />
This feature gives you the ability to control the processing order via the<br />
ORD screen software. This feature allows you to drag and drop the various<br />
processing elements as well as the ability to bypass the elements from the<br />
audio path.<br />
▶ Pressing the ORD button on the <strong>Genesys</strong> software will show up the<br />
Channel Processing screen.<br />
▶ You can also enter the ORD screen by pressing and holding the channel<br />
(yellow) SEL button then at the same time pressing the channel ORD<br />
button.<br />
The screen shows the elements and their order depending on what path<br />
they are in.<br />
Below the elements there is a green BYPASS button.<br />
▶ By clicking this button it will bypass the element from the current<br />
Channel or Monitor path it is assigned to.<br />
▶ To the left is a button called Bypass ALL. This will toggle bypass of all<br />
the elements in the current Channel or Monitor path.<br />
▶ With the mouse, left click and hold on any of the elements (above the<br />
BYPASS button) and drag them into the channel or monitor path or by<br />
dragging them to the left or right of where they are currently assigned<br />
then releasing the mouse button, will assign the element to where you<br />
want it to go.<br />
At the bottom is the EQ In SideChain indicator section. This is an<br />
indication only to show whether the EQ is in the Dynamics sidechain.<br />
▶ Once the EQ is in the sidechain it cannot be dragged or dropped. You<br />
can still click the BYPASS button to bypass the EQ whilst in the sidechain.<br />
You cannot drag and drop elements into this section, such as DYN or<br />
INS1/INS2.<br />
Below the DAW button on the Monitor Panel there are two buttons one<br />
with an arrow pointing left and the other with an arrow pointing right.<br />
▶ Pressing these will allow you to change the channel you are currently<br />
on.<br />
▶ Double-clicking on the EQ or DYN element in the ORD screen will open<br />
the EQ or Dynamics screen on that channel, for fast interrogation and<br />
control of the selected element.<br />
- 49 -
Change language