Genesys User Manual - AMS Neve

Optional Console Hardware
EQ Cassette
(Part number SMN 812-411)
The assembly number is either AM 5582 (8-bit systems) or AM 5644
(32-bit systems).
This cassette provides 8 Channels with classic Neve 1084 EQ (3 bands per
channel).
Without this card, the EQ button (and led) on each channel strip will not
function.
The EQ button on the Monitor Panel will not be locked out.
When the EQ cassette is present, the parameters are set using the four
encoders on the Monitor Panel.
The card itself has no external connectors / pin-outs.
Installation Instructions
• Remove the power to the console.
• Ensure the switch settings have been set correctly for this card's
position.
See Appendix A for the Switch Settings on page 226.
• Remove the entire ventilation facing plate on the rear of the console
by removing the two screws shown above.
• Slide the EQ cassette into the top-most available slot and push it to
the rear until the connectors mate securely onto the backplane.
• Screw the faceplate back into place.
- 19 -