You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DAW Computer Settings<br />
Mac OS X (DAW Computer)<br />
▶ On your Mac DAW computer, from the Apple menu, select System<br />
Preferences / Network. From the resulting screen;<br />
When not using a hub/studio network and connecting the <strong>Genesys</strong><br />
computer directly to the DAW computer using a cross-over cable:<br />
▶ Select Ethernet 1 (or the primary/connected ethernet<br />
connection) in the left hand window, and select <strong>Manual</strong>ly from<br />
the pull-down menu next to Configure IPv4.<br />
▶ Now set your DAW computer to these settings:<br />
• IP Address: 192 . 168 . 99 . 183<br />
• Subnet Mask: 255 . 255 . 255 . 0<br />
• Make sure the Router setting is blank.<br />
If a direct connection is not made, i.e. you are connecting via a router or<br />
hub (through your studio/company network):<br />
▶ Select Ethernet 1 (or the primary/connected ethernet<br />
connection) in the left hand window, and select Using DHCP<br />
from the pull-down menu next to Configure Ipv4.<br />
▶ Finally click Apply and close the Network/System Preferences windows.<br />
Windows 7 (DAW Computer)<br />
▶ On your Windows 7 DAW computer, from the Start Menu, select<br />
Control Panel (Small or Large icons View) / Network Sharing Centre /<br />
Change adapter settings / Local area Connection/ Properties.<br />
Select Internet Protocol Version 4 (TCP/IPv4) from the list (make<br />
sure the tick box remains selected) and click Properties.<br />
When not using a hub/studio network and connecting the <strong>Genesys</strong><br />
computer directly to the DAW computer using a cross-over cable:<br />
▶ Select Use the following IP address: and set your DAW<br />
computer to these settings:<br />
• IP Address: 192 . 168 . 99 . 183<br />
• Subnet Mask: 255 . 255 . 255 . 0<br />
• Make sure the Default gateway / DNS settings are blank.<br />
If a direct connection is not made, i.e. you are connecting via a router or<br />
hub (through your studio/company network):<br />
▶ Select Obtain an IP address automatically.<br />
▶ Select Obtain DNS server address automatically.<br />
▶ Finally click OK and close the Local Area Network/Control Panel<br />
windows.<br />
Windows XP (DAW Computer)<br />
▶ On your Windows XP DAW computer, from the Start Menu, select<br />
Control Panel (Classic View) / Network Connections / Local Area<br />
Connection / Properties. Select Internet Protocol (TCP/IP) from<br />
the list (make sure the tick box remains selected) and click Properties.<br />
When not using a hub/studio network and connecting the <strong>Genesys</strong><br />
computer directly to the DAW computer using a cross-over cable:<br />
- 27 -
Change language