Genesys User Manual - AMS Neve

Channel Section Connectors
As shown here, these 4 pairs of 25-way D-type connectors will be present for every 8-fader section.
The block of faders served by these D-types is indicated by the Block plate in the centre (this will say
either 1-8, 9-16 etc).
The pin-outs are identical for the same function within different blocks of faders.
I/P2 Tape Monitor Send
(Can be used as another input for I/P2 Monitor, selectable by selecting I/P2 Send on the relevant channel
strip)
(25-way D-type)
Pin
Signal
Name
Hi Lo Screen
1 I/P 2 Tape Monitor Send 1 24 12 25
2 I/P 2 Tape Monitor Send 2 10 23 11
3 I/P 2 Tape Monitor Send 3 21 9 22
4 I/P 2 Tape Monitor Send 4 7 20 8
5 I/P 2 Tape Monitor Send 5 18 6 19
6 I/P 2 Tape Monitor Send 6 4 17 5
7 I/P 2 Tape Monitor Send 7 15 3 16
8 I/P 2 Tape Monitor Send 8 1 14 2
I/P2 Tape Monitor Return
(Used for the Main Input Return to the monitor path when in Mix Mode).
(25-way D-type)
Pin
Signal
Name
Hi Lo Screen
1 I/P 2 Tape Monitor Return 1 24 12 25
2 I/P 2 Tape Monitor Return 2 10 23 11
3 I/P 2 Tape Monitor Return 3 21 9 22
4 I/P 2 Tape Monitor Return 4 7 20 8
5 I/P 2 Tape Monitor Return 5 18 6 19
6 I/P 2 Tape Monitor Return 6 4 17 5
7 I/P 2 Tape Monitor Return 7 15 3 16
8 I/P 2 Tape Monitor Return 8 1 14 2
- 215 -