Genesys User Manual - AMS Neve

▶ Click Settings Within Software on the Genesys menu bar.
▶ In Settings, in the section labelled 'Channel FNC Control', select the
option 4081 MIC Control by clicking the tick box.
▶ Return to the 4081 screen.
On the Genesys channel strip, push Channel encoder at the top (red)
ensuring that FNC is selected (led will light green).
With the Channel strip, you can control:
▶ 48V
▶ -20
▶ LOW Z
▶ Ø
The remaining buttons MIC/LINE and INS are controlled via the
software.
Turning the encoder on the Channel strip will change the MIC gain.
When you assign a 4081 to Genesys, the 4081 switches will light red. This
means that the 4081 is locked out and can only be controlled using
software or Genesys channel strips. Otherwise the switches will light
yellow.
The LCD display on 4081 shows Genesys channel assignment i.e. 01, 02...
64 etc.
As you change a parameter via software or channel strip, the gain value
will be displayed momentarily on the LCD display but will revert back to
the assigned channel.
Clicking AUTO SEL i.e. Auto Select in 4081 software screen will allow
software to follow live changes made via the Genesys channel strips.
- 167 -