80C186EC/80C188EC Microprocessor User's Manual

More documents

Recommendations

Info

OVERVIEW OF THE 80C186 FAMILY ARCHITECTURE High Address Displacement 6 + Base Register (BP) + Index Register 12 EA Parm 2 Parm 1 IP Old BP Old BX Old AX Array (6) Array (5) Array (4) Array (3) Array (2) Array (1) Array (0) Count Temp Status Displacement 6 + (BP) Base Register + Index Register 12 EA 1 Word Low Address Figure 2-20. Accessing a Stacked Array with Based Index Addressing A1024-0A 2-35
OVERVIEW OF THE 80C186 FAMILY ARCHITECTURE Opcode SI DI Source EA Destination EA A1025-0A Figure 2-21. String Operand 2.2.2.3 I/O Port Addressing Any memory operand addressing modes can be used to access an I/O port if the port is memorymapped. String instructions can also be used to transfer data to memory-mapped ports with an appropriate hardware interface. Two addressing modes can be used to access ports located in the I/O space (see Figure 2-22). For direct I/O port addressing, the port number is an 8-bit immediate operand. This allows fixed access to ports numbered 0 to 255. Indirect I/O port addressing is similar to register indirect addressing of memory operands. The DX register contains the port number, which can range from 0 to 65,535. Adjusting the contents of the DX register allows one instruction to access any port in the I/O space. A group of adjacent ports can be accessed using a simple software loop that adjusts the value of the DX register. Opcode Data Opcode Port Address Direct Port Addressing DX Indirect Port Addressing Port Address A1026-0A Figure 2-22. I/O Port Addressing 2-36
Page 1 and 2:
80C186EC/80C188EC Microprocessor Us
Page 3 and 4:
Information in this document is pro
Page 5 and 6:
CONTENTS 2.3 INTERRUPTS AND EXCEPTI
Page 7 and 8:
CONTENTS 6.4 PROGRAMMING...........
Page 9 and 10:
CONTENTS CHAPTER 9 TIMER/COUNTER UN
Page 11 and 12:
CONTENTS 11.4 SERIAL COMMUNICATIONS
Page 13 and 14:
CONTENTS FIGURES Figure Page 2-1 Si
Page 15 and 16:
CONTENTS FIGURES Figure Page 6-6 ST
Page 17 and 18: CONTENTS FIGURES Figure Page 11-18
Page 19 and 20: CONTENTS Table TABLES Page C-1 Inst
Page 22: Introduction 1
Page 25 and 26: INTRODUCTION The 80C186 Modular Cor
Page 27 and 28: INTRODUCTION Table 1-2. Related Doc
Page 29 and 30: INTRODUCTION 1.3.2.1 How to Find Ap
Page 32: Overview of the 80C186 Family Archi
Page 35 and 36: OVERVIEW OF THE 80C186 FAMILY ARCHI
Page 67: OVERVIEW OF THE 80C186 FAMILY ARCHI
Page 84: Bus Interface Unit 3
Page 87 and 88: BUS INTERFACE UNIT Physical Impleme
Page 89 and 90: BUS INTERFACE UNIT (X + 1) (X) A19:
Page 91 and 92: BUS INTERFACE UNIT For word transfe
Page 93 and 94: BUS INTERFACE UNIT CLKOUT T4 T1 T2
Page 95 and 96: BUS INTERFACE UNIT CLKOUT T4 or TI
Page 97 and 98: BUS INTERFACE UNIT Signals From CPU
Page 99 and 100: BUS INTERFACE UNIT T2 T3 or TW T4 o
Page 101 and 102: BUS INTERFACE UNIT A normally not-r
Page 103 and 104: BUS INTERFACE UNIT T2 or T3 or TW T
Page 105 and 106: BUS INTERFACE UNIT An idle bus stat
Page 107 and 108: BUS INTERFACE UNIT T1 T2 T3 T4 CLKO
Page 109 and 110: BUS INTERFACE UNIT T1 T2 T3 T4 CLKO
Page 111 and 112: BUS INTERFACE UNIT The minimum devi
Page 113 and 114: BUS INTERFACE UNIT Figure 3-24 show
Page 115 and 116: BUS INTERFACE UNIT After several TI
Page 117 and 118: BUS INTERFACE UNIT 3.5.5 Temporaril
Page 119 and 120:
BUS INTERFACE UNIT CLKOUT ALE T4 T1
Page 121 and 122:
BUS INTERFACE UNIT CLKOUT NMI/NTx N
Page 123 and 124:
BUS INTERFACE UNIT ALE Processor A1
Page 125 and 126:
BUS INTERFACE UNIT The WAIT instruc
Page 127 and 128:
BUS INTERFACE UNIT CLKOUT HOLD 1 2
Page 129 and 130:
BUS INTERFACE UNIT CLKOUT 1 3 4 HOL
Page 131 and 132:
BUS INTERFACE UNIT CLKOUT HOLD 1 2
Page 134:
Peripheral Control Block 4
Page 137 and 138:
PERIPHERAL CONTROL BLOCK Register N
Page 139 and 140:
PERIPHERAL CONTROL BLOCK 4.3 RESERV
Page 141 and 142:
PERIPHERAL CONTROL BLOCK 4.4.3.1 Wr
Page 144:
Clock Generation and Power Manageme
Page 147 and 148:
CLOCK GENERATION AND POWER MANAGEME
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 172 and 173:
CHAPTER 6 CHIP-SELECT UNIT Every sy
Page 174 and 175:
CHIP-SELECT UNIT Stop Value Ignore
Page 176 and 177:
CHIP-SELECT UNIT Address 1 Ready Fl
Page 178 and 179:
CHIP-SELECT UNIT Register Name: Reg
Page 180 and 181:
CHIP-SELECT UNIT Register Name: Reg
Page 182 and 183:
CHIP-SELECT UNIT In the previous eq
Page 184 and 185:
CHIP-SELECT UNIT No Any READY = 1 W
Page 186 and 187:
CHIP-SELECT UNIT The GCS chip-selec
Page 188 and 189:
CHIP-SELECT UNIT $ TITLE (Chip-Sele
Page 190 and 191:
CHIP-SELECT UNIT ;SET UP CHIP SELEC
Page 192:
Refresh Control Unit 7
Page 195 and 196:
REFRESH CONTROL UNIT 7.1 THE ROLE O
Page 197 and 198:
REFRESH CONTROL UNIT The BIU does n
Page 199 and 200:
REFRESH CONTROL UNIT CLKOUT T4 T1 T
Page 201 and 202:
REFRESH CONTROL UNIT 7.7.2.1 Refres
Page 203 and 204:
REFRESH CONTROL UNIT Register Name:
Page 205 and 206:
REFRESH CONTROL UNIT $mod186 name e
Page 207 and 208:
REFRESH CONTROL UNIT T1 T1 T1 T1 T1
Page 210 and 211:
CHAPTER 8 INTERRUPT CONTROL UNIT Th
Page 212 and 213:
INTERRUPT CONTROL UNIT Polling requ
Page 214 and 215:
INTERRUPT CONTROL UNIT INT INTA D7:
Page 216 and 217:
INTERRUPT CONTROL UNIT Edge Sense L
Page 218 and 219:
INTERRUPT CONTROL UNIT 8.3.2 Interr
Page 220 and 221:
INTERRUPT CONTROL UNIT 8.3.3.1 Defa
Page 222 and 223:
INTERRUPT CONTROL UNIT More than on
Page 224 and 225:
INTERRUPT CONTROL UNIT IR0 IR1 IR2
Page 226 and 227:
INTERRUPT CONTROL UNIT 10. On the s
Page 228 and 229:
INTERRUPT CONTROL UNIT 8.3.7 Altern
Page 230 and 231:
INTERRUPT CONTROL UNIT 8.4.2 Progra
Page 232 and 233:
INTERRUPT CONTROL UNIT Begin Initia
Page 234 and 235:
INTERRUPT CONTROL UNIT 8.4.3.3 ICW2
Page 236 and 237:
INTERRUPT CONTROL UNIT Register Nam
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
INTERRUPT CONTROL UNIT Table 8-2. O
Page 244 and 245:
INTERRUPT CONTROL UNIT The ESMM (En
Page 246 and 247:
INTERRUPT CONTROL UNIT Internal Int
Page 248 and 249:
INTERRUPT CONTROL UNIT To Slave 825
Page 250 and 251:
Page 252 and 253:
INTERRUPT CONTROL UNIT 8.6.1 Interr
Page 254 and 255:
INTERRUPT CONTROL UNIT CPU WR RD GC
Page 256 and 257:
INTERRUPT CONTROL UNIT Non-Alike Ac
Page 258 and 259:
INTERRUPT CONTROL UNIT ;Now start t
Page 260:
INTERRUPT CONTROL UNIT ;The followi
Page 264 and 265:
CHAPTER 9 TIMER/COUNTER UNIT The Ti
Page 266 and 267:
TIMER/COUNTER UNIT Timer 0 Timer 1
Page 268 and 269:
TIMER/COUNTER UNIT Continued From "
Page 270 and 271:
TIMER/COUNTER UNIT Register Name: R
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
TIMER/COUNTER UNIT The timer counti
Page 278 and 279:
TIMER/COUNTER UNIT Timer 0 Serviced
Page 280 and 281:
TIMER/COUNTER UNIT 9.3.2 Synchroniz
Page 282 and 283:
TIMER/COUNTER UNIT lib_80186 segmen
Page 284 and 285:
TIMER/COUNTER UNIT $mod186 name exa
Page 286:
TIMER/COUNTER UNIT _CMPB equ word p
Page 290 and 291:
CHAPTER 10 DIRECT MEMORY ACCESS UNI
Page 292 and 293:
DIRECT MEMORY ACCESS UNIT 10.1.1.1
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
DIRECT MEMORY ACCESS UNIT The Chip-
Page 300 and 301:
DIRECT MEMORY ACCESS UNIT Both Requ
Page 302 and 303:
Page 304 and 305:
DIRECT MEMORY ACCESS UNIT Channel a
Page 306 and 307:
DIRECT MEMORY ACCESS UNIT Register
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
DIRECT MEMORY ACCESS UNIT When inte
Page 314 and 315:
DIRECT MEMORY ACCESS UNIT The trans
Page 316 and 317:
DIRECT MEMORY ACCESS UNIT 10.2.4 Su
Page 318 and 319:
DIRECT MEMORY ACCESS UNIT 10.3.1 DR
Page 320 and 321:
DIRECT MEMORY ACCESS UNIT $MOD186 n
Page 322 and 323:
DIRECT MEMORY ACCESS UNIT SECTORS M
Page 324 and 325:
DIRECT MEMORY ACCESS UNIT XOR AX, A
Page 326 and 327:
DIRECT MEMORY ACCESS UNIT $mod186 n
Page 328:
Serial Communications Unit 11
Page 331 and 332:
SERIAL COMMUNICATIONS UNIT 1 2 3 4
Page 333 and 334:
SERIAL COMMUNICATIONS UNIT The RX m
Page 335 and 336:
SERIAL COMMUNICATIONS UNIT The Tran
Page 337 and 338:
SERIAL COMMUNICATIONS UNIT 5. At th
Page 339 and 340:
SERIAL COMMUNICATIONS UNIT Register
Page 341 and 342:
SERIAL COMMUNICATIONS UNIT Register
Page 343 and 344:
SERIAL COMMUNICATIONS UNIT 3. If th
Page 345 and 346:
SERIAL COMMUNICATIONS UNIT The seri
Page 347 and 348:
SERIAL COMMUNICATIONS UNIT 11.2.3 P
Page 349 and 350:
SERIAL COMMUNICATIONS UNIT BCLK is
Page 351 and 352:
SERIAL COMMUNICATIONS UNIT $mod186
Page 353 and 354:
SERIAL COMMUNICATIONS UNIT mov dx,
Page 355 and 356:
Page 357 and 358:
SERIAL COMMUNICATIONS UNIT mov dx,
Page 359 and 360:
SERIAL COMMUNICATIONS UNIT Disconne
Page 361 and 362:
Page 364 and 365:
CHAPTER 12 WATCHDOG TIMER UNIT Syst
Page 366 and 367:
WATCHDOG TIMER UNIT Figure 12-3(b)
Page 368 and 369:
WATCHDOG TIMER UNIT wdt_data segmen
Page 370 and 371:
WATCHDOG TIMER UNIT A LOCKed instru
Page 372 and 373:
WATCHDOG TIMER UNIT Register Name:
Page 374 and 375:
WATCHDOG TIMER UNIT Register Name:
Page 376:
WATCHDOG TIMER UNIT wdt_data segmen
Page 380 and 381:
CHAPTER 13 INPUT/OUTPUT PORTS Many
Page 382 and 383:
INPUT/OUTPUT PORTS 13.1.2 Output Po
Page 384 and 385:
INPUT/OUTPUT PORTS From Port Direct
Page 386 and 387:
INPUT/OUTPUT PORTS 13.1.4.3 Port 3
Page 388 and 389:
INPUT/OUTPUT PORTS Register Name: R
Page 390 and 391:
INPUT/OUTPUT PORTS Register Name: R
Page 392:
Math Coprocessing 14
Page 395 and 396:
MATH COPROCESSING 14.3 THE 80C187 M
Page 397 and 398:
MATH COPROCESSING Available data ty
Page 399 and 400:
MATH COPROCESSING 14.3.1.5 Constant
Page 401 and 402:
MATH COPROCESSING Increasing Signif
Page 403 and 404:
MATH COPROCESSING 14.4.1 Clocking t
Page 405 and 406:
MATH COPROCESSING External Oscillat
Page 407 and 408:
MATH COPROCESSING 80C186 Modular Co
Page 409 and 410:
MATH COPROCESSING $mod186 $modc187
Page 412:
CHAPTER 15 ONCE MODE ONCE (pronounc
Page 416 and 417:
APPENDIX A 80C186 INSTRUCTION SET A
Page 418 and 419:
80C186 INSTRUCTION SET ADDITIONS AN
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426:
Input Synchronization B
Page 429 and 430:
INPUT SYNCHRONIZATION A synchroniza
Page 432 and 433:
APPENDIX C INSTRUCTION SET DESCRIPT
Page 434 and 435:
INSTRUCTION SET DESCRIPTIONS Table
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
INSTRUCTION SET DESCRIPTIONS NEG NO
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
INSTRUCTION SET DESCRIPTIONS SHR ST
Page 476 and 477:
Page 478:
Page 482 and 483:
APPENDIX D INSTRUCTION SET OPCODES
Page 484 and 485:
INSTRUCTION SET OPCODES AND CLOCK C
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504:
Index
Page 507 and 508:
INDEX AH register, 2-5 AL register,
Page 509 and 510:
INDEX synchronization, 10-23 transf
Page 511 and 512:
INDEX NMI, 2-42 generating with WDT
Page 513 and 514:
INDEX bus latency, 7-7 calculating
Page 515:
INDEX Trap exceptions, 2-42 Trap Fl
show all

80C186EC/80C188EC Microprocessor User's Manual

Create successful ePaper yourself

Delete template?

Save as template?