Materiali e Tecnologie per la realizzazione di sostituti - FedOA ...

266 - RIFERIMENTI BIBLIOGRAFICI
[ 73 ]. A.G. Mikos, J.S. Temenoff - Formation of highly porous biodegradable scaffolds for tissue
engineering – EJB electronics – Journal of biotechnology (2000).
[ 74 ]. Chen G., Ushida T., Tateishi T. - Scaffold Design for Tissue Engineering - Macromol. Biosci. 2
(2002) p.69-70;
[ 75 ]. G. Chen, Tateishi T - Development of biodegradable porous scaffolds for tissue engineering -
Materials Science and Engineering C 17 2001 63–69.
[ 76 ]. R. Akki,* P. Desai, A. S. Abhiraman - A Framework for Morphological Evolution vis-a`-vis
Phase Transitions in Polymer Solutions - Journal of Applied Polymer Science, Vol. 73, 1343–
1355 (1999)
[ 77 ]. Schugens C, Maquet V, Grandfils C, Jerome R, Teyssie P. Biodegradable macroporous polylactide
implants for cell transplantation: I. Preparation of polylactide foams by solid-liquid phase
separation. Polymer 1996;37:1027–1038.
[ 78 ]. Schugens C, Maquet V, Grandfils C, Jerome R, Teyssie P. Polylactide macroporous biodegradable
implants for cell transplantation. II. Preparation of polylactide foams by liquid-liquid
phase separation. J Biomed Mater Res 1996;30:449–461.
[ 79 ]. Y.Hu, D.W. Grainger, S.R. Winn, J.O. Hollinger - Fabrication of poly(a-hydroxy acid) foam
scaffolds using multiple solvent systems - J Biomed Mater Res 59: 563–572, 2002;
[ 80 ]. P.X.Ma – Scaffolds for tissue fabrication - ISSN:1369 7021 - Elsevier Ltd 2004;
[ 81 ]. Zhang, R., and Ma, P. X. - Poly(a-hydroxyl acids)/hydroxyapatite porous composites for
bone-tissue engineering. I. Preparation and morphology - J. Biomed. Mater. Res.(1999) 44,
446.
[ 82 ]. Ma, P.X, et al. - Engineering new bone tissue in vitro on highly porous poly(a-hydroxyl
acids)/hydroxyapatite composite scaffolds - J. Biomed. Mater. Res.(2001) 54, 284;
[ 83 ]. Ma, P.X., and Zhang R. - Microtubular architecture of biodegradable polymer scaffolds, J.
Biomed. Mater. Res.(2001) 56, 469;
[ 84 ]. Tu, Wang - The Fabrication and Characterization of Poly(lactic acid) Scaffolds for Tissue
Engineering by Improved Solid–Liquid Phase Separation – Polym. Adv. Technol. 14, 565–
573 (2003);
[ 85 ]. Zhang R., P.X. Ma - Poly(a-hydroxyl acids)/hydroxyapatite porous composites for bonetissue
engineering. I. Preparation and morphology -– J Biomed Mater Res, 44, 446–455, 1999.
[ 86 ]. J. C. Meredith, E. J. Amis - LCST phase separation in biodegradable polymer blends:
poly(D,L-lactide) and poly(e-caprolactone) - Macromol. Chem. Phys. 201, 733–739 (2000)
[ 87 ]. Li S., La Carrubba V., Piccarolo S. Sannino D., Brucato V.- Poly(L-lactic acid) scaffolds from a
ternary polymer–solvent system - Polym Int 53:2079–2085 (2004).
[ 88 ]. M.H.Ho, D.M.Wang - Preparation of porous scaffolds by using freeze-extraction and freezegelation
methods - Biomaterials 25 (2004) 129–138.
[ 89 ]. V.J. Chen, P.X. Ma – Nano-fibrous poly(L-lactid) scaffolds with interconnected spherical
macropores – Biomaterials 25 (2004) 2065-2073;
[ 90 ]. Q.Hou, D.W. G.J.Feijen - Porous polymeric structures for tissue engineering prepared by a
coagulation, compression moulding and salt leaching technique - Biomaterials 24 (2003)
1937–1947:
[ 91 ]. R.C. Thomson, M.J.Yaszemski, J.M. Powers, A.G.Mikos - Hydroxyapatite fiber reinforced poly(ahydroxy
ester) foams - Biomaterials 19 (1998) 1935–1943
[ 92 ]. E.A. Sander, A.M. Alb, E.A. Nauman,W.F. Reed, K.C.Dee - Solvent effects on the microstructure
and properties of 75/25 poly(D,L-lactide-co-polyglicolide) tissue scaffolds - J Biomed Mater
Res 70A 506–513, 2004.
[ 93 ]. Chiang Y.M., Dunbar B., Kingery W.D. - Physical ceramics - p.393-403;