LTV 1100 Operator Manual - CareFusion

Alarm Name Displayed Alarm Priority Level
11. DEFAULTS Defaults High
12. NO CAL DATA No Calibration Data High
13. HW FAULT Hardware Fault High
14. RESET or RESET 1 Reset High
15. HIGH PRES High Pressure High
16. LOW MIN VOL 57 Low Minute Volume Medium
17. LOW PRES Low Peak Pressure Medium
18. XDCR FAULT Transducer Fault Medium
19. DEFAULTS SET Defaults Set Medium
20. HIGH PEEP High PEEP Medium
21. HIGH f High Rate Low
22. SBT > f 57 SBT High f Low
23. SBT < f 57 SBT Low f Low
24. SBT > f/Vt 57 SBT High f/Vt Low
25. SBT < f/Vt 57 SBT Low f/Vt Low
26. SBT OFF 57 SBT Off Low
27. LOW PEEP Low PEEP Low
57 Only available when Flow Sensing Patient Circuit mode is enabled (see Chapter 12 – Operating Procedure for
additional information).
21106-001 Rev. E Operator’s Manual - LTV ® 1100 Ventilator 15-17