LTV 1100 Operator Manual - CareFusion

Chapter 9 - VENTILATOR ALARMS
When conditions requiring immediate operator interaction are detected by the LTV ® 1100 ventilator,
an alarm is generated. Some alarms can reset themselves, for instance, a high pressure alarm that is
caused by a cough. Other alarms require some action from the operator and the audible and visual
alarms will continue until the problem is corrected.
When an alarm occurs:
A flashing alarm message appears in the display window.
An audible alarm sounds.
Any associated control displays flash.
Depending on the alarm, other actions may be taken, such as terminating an inspiration or
opening the exhalation valve.
When an alarm condition clears:
The audible alarm is silenced.
The alarm message continues to flash in the display window.
Any associated control displays continue to flash.
WARNING
Adjustable and Critical Alarms – For safety purposes, all adjustable alarms and all critical alarms
must be checked to insure proper operation.
Audible Alarms - Failure to immediately identify and correct audible alarm situations may result in
serious patient injury.
AVERTISSEMENT
Alarmes réglables et critiques – Pour assurer la sécurité et obtenir un fonctionnement adéquat,
toutes les alarmes réglables et critiques doivent être vérifiées.
Alarmes sonores - L'échec à identifier et à corriger dans l'immédiat les situations d'alarmes sonores
peut causer des blessures au patient.
The following sections describe what alarms can occur on the LTV ® 1100 ventilator and how to
correct them.
21106-001 Rev. E Operator’s Manual - LTV ® 1100 Ventilator 9-1