LTV 1100 Operator Manual - CareFusion

Item (5), #4-40 X 3/8” Flat-head mounting screws (2) P/N 10474 79
Item (6), Finish Washers (8) P/N 19119-002 79
Item (7), #4-40 X 1/2” Flat-head mounting screws (6) P/N 10338 79
5) Insert and thread two #4-40 X 1/2” flat-head mounting screws (7) with finish washers (6) through
the screw holes in the sides of the upper boot, as indicated in the illustration.
6) Torque tighten the mounting screws to these specified values (do not over tighten to avoid
damage to the finish washers).
Torque tighten the screws in the legs of the boot to 60 in-oz (0.42 Nm)
Torque tighten the screws in the sides of the boot to 20 in-oz (0.14 Nm)
79
Contained in CareFusion Replacement Screws kit, P/N 11149.
21106-001, Rev. E Operator’s Manual - LTV ® 1100 Ventilator C-7