06.02.2014 Views

LTV 1100 Operator Manual - CareFusion

LTV 1100 Operator Manual - CareFusion

LTV 1100 Operator Manual - CareFusion

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Appendix E - EVENT TRACE<br />

The Event Trace is a list of events recorded by the ventilator. These events may be normal<br />

conditions, such as turning the ventilator on or off, or alarm conditions such as HW FAULT or HIGH<br />

PRES.<br />

Initial occurrences of events are recorded the first time they occur after power up, along with the<br />

date, time and associated data, if any.<br />

A second occurrence of the same type of event (same event code) will be recorded as a<br />

separate line item along with the latest date, time and associated data. The quantity of<br />

occurrences is increased by one (1) (i.e. a quantity of two (2) will be displayed)).<br />

Additional occurrences (3 rd or more) of the same type of event will update the secondary<br />

occurrence line items with the latest date, time, and associated data. The quantity of<br />

occurrences will be increased by one (1) for each additional occurrence (i.e. the quantity of 2 will<br />

be increased to 3).<br />

NOTE<br />

Event log entries are only one of many diagnostic tools used to troubleshoot the ventilator. Additional<br />

information is often required to accurately identify the root cause of a problem. See Chapter 15 -<br />

Troubleshooting for more information.<br />

REMARQUE<br />

Les entrées du journal d’événements ne représentent que l’un des nombreux outils de diagnostic<br />

utilisés pour localiser les pannes du ventilateur. Des informations supplémentaires sont souvent<br />

nécessaires pour identifier de façon précise la source d’un problème. Reportez-vous au Chapitre 15 –<br />

Dépannage, pour de plus amples informations.<br />

To view the events:<br />

1) Enter the Extended Features menu by pushing and holding the Select button for 3 seconds.<br />

2) Turn the Set Value knob until EVENT TRACE is displayed.<br />

3) Push the Select button while EVENT TRACE is displayed.<br />

xx:eventname is displayed.<br />

xx is the chronological number of the event occurrence.<br />

eventname is the name of the event.<br />

4) Push the Select button.<br />

xx:EyCz is displayed.<br />

xx is the chronological number of the event occurrence.<br />

y is the event code number of the event.<br />

z is the quantity of occurrences since power up 84 .<br />

84 The maximum number of occurrences recorded is 255.<br />

21106-001, Rev. E <strong>Operator</strong>’s <strong>Manual</strong> - <strong>LTV</strong> ® <strong>1100</strong> Ventilator E-1

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!