LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
MLC Maintenance -- C,S Bits and Register
C Bit 219
C Bit 220
C Bit 221
C Bit 222
Description:
Absolute Encoder Bit 1 Transmit: X Axis
Absolute Encoder Bit 1 Transmit: Y Axis
Absolute Encoder Bit 1 Transmit: Z Axis
Absolute Encoder Bit 1 Transmit: 4th Axis
Assumed absolute encoder data reading is sent by serial transmitting. Also, assumed 2 bits of
Encoder will be transmitted every time. So, when this bit is ON, it indicates that the signal of
transmitting 2 bits data from driver to NC is 1.
C Bit 064
C Bit 065
Description:
MLC Window Read/Write Signal
MLC Commanding Signal
Please refer to 4.7 MLC Window structure for a detailed description.
98 LNC Technology Co., Ltd.