LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
Description
:
This parameter will affect arching precision degree. The smaller the setting
value is, the better the result is but the longer the working hour. User must set
the allowable error range according to the actual arch size. Recommending the
minimum setting value is around 10μm.
810 SET RIGID TAP IN G101~G105
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 0
value:
Unit: Nul
Description When applying multi-hole drilling compound G code (G101 ~105), use this
:
parameter to set the tapping function. Set to 1: rigid tapping is activated; set to
0, tapping is activated. The preset mode is tapping.
848 X AXIS OPTIMAL
849 Y AXIS OPTIMAL
850 Z AXIS OPTIMAL
Range: 0 ~ 3
Active: Active After RESET
Level: User
Default 0
value:
Unit: Nul
Description
:
This parameter is effective only for rotary axis.
bit 0: Coordinate display method selection
0: Display as Linear method.
1: Display as one rotate 0.000~360.000 cycle method.
bit 1: Coordinate display method is 0~360 cycle(bit 0 setting is 1), user is able
to select whether or not the absolute command is handled as the shortest path.
0: Calculate the shortest moving distance.
1: Move according to commanding value.
(Note)Incremental commanding is NOT handled as the shortest path at all.
250 LNC Technology Co., Ltd.