LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
compensation starts toward +ive direction.
BIT3:for setting 4 th axis, 1 means pitch error compensation starts from –ive
direction 4 th axis returns to the reference point; 0 means pitch error
compensation starts toward +ive direction.
119 ENABLE FLAG OF PITCH COMP
Range: 0 ~ 63
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description BIT0:for X axis, 1 means to enable X axis pitch error compensation function; 0
:
means not to enable.
BIT1:for Y axis, 1 means to enable Y axis pitch error compensation function; 0
means not to enable.
BIT2:for Z axis, 1 means to enable Z-axis pitch error compensation function; 0
means not to enable.
BIT3:for 4 th axis, 1 means to enable 4 th axis pitch error compensation function;
0 means not to enable.
300 PITCH X COMP.001
349 PITCH X COMP.050
1200 PITCH X COMP.051
1299 PITCH X COMP.150
Range: -20000 ~ 20000
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
assumed pitch error on the nth section of X axis is M (um), the parameter
#(300+N – 1) is set as M, parameter 0038 is set as 16.
358 ENABLE THERMO DEFORMED CMP
Range: 0 ~ 1
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description
:
0:Turn off the thermal compensation function
1:Turn on the thermal compensation function
LNC Technology Co., Ltd. 205