LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SYSTEM ALARM and WARNING
INT 3172:CUT UP CHAMFER OVER RANGE
INT 3201:COMP UNIT VECTOR 0
(1)Compensation unit vector is 0.
(2)System error, please contact supplier.
(3)Press RESET to clear wrong warning message
INT 3202:COMP START UP ARC
(1)Compensating start-up is arch.
(2)Please start compensating according to G00/G01.
(3)Press RESET to clear wrong warning message.
INT 3203:COMP CANCEL ARC
(1)Compensating cancel is arch.
(2)Please cancel compensation according to G00/G01.
(3)Press RESET to clear wrong warning message.
INT 3204:COMP LINE DET 0
(1)DETERMINE values is 0.
(2)Check part program.
(3)System error, please contact supplier.
INT 3205:COMP VECTOR LENGTH 0
(1)DETERMINE values is 0.
(2)Check part program.
(3)System error, please contact supplier.
INT 3206:COMP INTERFERENCE
(1)Over cutting interference occurs.
(2)Decrease compensation radius or modify part program pathway.
(3)Press RESET to clear wrong message error.
INT 3207:COMP NO INTERSECTION
(1)Not able to find the intersect points while calculating compensation value.
(2)Decrease compensation radius or modify part program pathway.
( 3 ) Press RESET to clear wrong warning message.
LNC Technology Co., Ltd. 267