LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
815 SPIKE -X CMP VALUE
825 SPIKE -Y CMP VALUE
831 SPIKE -Z CMP VALUE
Range: 0 ~ 200
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
assumed doing the circular testing. When the spike value of -ive X axis direction
is 0, this means NOT to enable the spike compensation function of -ive X-axis
direction.
816 SPIKE -X CMP TIME
826 SPIKE -Y CMP TIME
832 SPIKE -Z CMP TIME
Range: 0 ~ 200
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
Please check the controller’s actual disconnecting time interval first and then set
the value. Assumed doing canned cycle testing. When set the spike time
interval to 0, it means NOT to enable the spike compensation function of -ive
X-axis direction.
210 LNC Technology Co., Ltd.