LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SYSTEM ALARM and WARNING
MOT
4029:SET PARAM 23 ERROR
MOT 4030:SET PARAM 14 ERROR
(1)Parameter #14 setting error.
(2)Re-set parameter and re-boot.
MOT 4031:SET PARAM 10 ERROR
(1)Parameter #10setting error.
(2)Re-set parameter and re-boot.
MOT 4032:SET PARAM 11 ERROR
(1)Parameter # 11 setting error.
(2)Re-set parameter and re-boot.
MOT 4033:SET PARAM 12 ERROR
(1)Parameter # 12 setting error.
(2)Re-set parameter and re-boot.
MOT 4034:SET PARAM 13 ERROR
(1)Parameter # 13 setting error.
(2)Re-set parameter and re-boot.
MOT 4035:SET CMR ERROR
(1)Setting CMR error
(2)Checking Para. # 0053 ~ 0056,0067 ~ 0070,0072,0100 ~ 0107,1112 ~ 1115.
(3)Re-setting parameter and re-booting.
MOT 4036:SET IN POSITION CHECK ERROR
(1)Setting position check error.
(2)Checking Para. # 0006 ~ 0009.
(3)Re-setting parameter and re-booting.
MOT 4037:SET DMR ERROR
(1)DMR setting error.
(2)Checking whether or not the setting value is over setting parameter 53~57 range.
(3)Re-setting parameter and re-booting.
272 LNC Technology Co., Ltd.