LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SYSTEM ALARM and WARNING
MOT 4011:SPINDLE SPEED ERROR
(1)Spindle shaking value is grater than parameter 97 setting value.
(2)Checking whether or not the setting values of parameter 57, 61, 92, and 97 are
correct.
(3)Checking whether or not the spindle is working normally.
(4)Clicking RESET to continue operating.
(5)If change the parameter, need to reboot for the new setting parameter to be
effective.
MOT
4012:NO FINAL LINE
MOT
4013:NO BLOCK
MOT 4014:X AXIS ON HOME DOG
(1)X Axis on HOME DOG.
(2)Clicking RESET, use JOG to take the machine away from HOME DOG then will
be able to return to the reference point.
MOT 4015:Y AXIS ON HOME DOG
(1)Y Axis on HOME DOG.
(2)Clicking RESET, use JOG to take the machine away from HOME DOG then will
be able to return to the reference point.
MOT 4016:Z AXIS ON HOME DOG
(1)Z Axis on HOME DOG.
(2)Clicking RESET, use JOG to take the machine away from HOME DOG then will
be able to return to the reference point.
MOT 4017:4TH AXIS ON HOME DOG
(1)4th Axis on HOME DOG.
(2)Clicking RESET, use JOG to take the machine away from HOME DOG then will
be able to return to the reference point.
MOT 4018:NO RETURN HOME
(1)Not return to the reference point after rebooting.
(2)Clicking RESET and return to the reference point first.
270 LNC Technology Co., Ltd.