LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
5.7 Zero Return parameter
19 WAY TO DEAL HOMING ON DOG
Range: 0 ~ 1
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description:0:warning from the system in order to inform user to move away the servo axis.
Then the system will execute the zero return procedure. Each axis warning
message is as following:
X Axis:【 MOT 0014 X axis is on HOME DOG】
Y Axis:【 MOT 0015 Y axis is on HOME DOG】
Z Axis:【 MOT 0016 Z axis is on HOME DOG】
4 th Axis:【 MOT 0017 4 th axis is on HOME DOG】
1:NC moves away the servo axis automatically (moves toward the reverse
direction from the reference point). After getting away from DOG, it will execute
home/zero return procedure.
20 DEFAULT OF RETURN HOME FN.(BIT)
Range: 0 ~ 63
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description:After turning on the machine, check if each axis is preset to having returned to
reference point.
Bit 0:X axis
Bit 1:Y axis
Bit 2:Z axis
Bit 3:The 4 th axis
Bit 4:The 5 th axis
Bit 5:The 6 th axis
30 OFFSET LENGTH OF X.ORG
31 OFFSET LENGTH OF Y.ORG
32 OFFSET LENGTH OF Z.ORG
33 OFFSET LENGTH OF 4.ORG
Range: -99999999 ~ 99999999
Active: Active After RESET
Level: Machinery Builder
LNC Technology Co., Ltd. 213