LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
112 NUM.SECS OF X.PICTH COMP
113 NUM.SECS OF Y.PICTH COMP
114 NUM.SECS OF Z.PICTH COMP
115 NUM.SECS OF 4TH.PICTH COMP
Range: 1 ~ 150
Active: Active After Reboot
Level: Machinery Builder
Default 20
value:
Unit: Nul
Description
:
to set total section of X-axis pitch error compensation. The multiple product of
this parameter setting value and parameter 1018(1019, 1020, 1021) setting
value should be the total length of X-axis ball screw pitch error compensation.
Now the max compensation section is 50 sections for each axis.
117 ENABLE OF BACKLASH COMP(BIT)
Range: 0 ~ 63
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description BIT0: for X axis, 1 means to enable X-axis backlash compensation function; 0
:
means not to enable.
BIT1:for Y axis, 1 means to enable Y axis backlash compensation function; 0
means not to enable.
BIT2:for Z axis, 1 means to enable Z axis backlash compensation function; 0
means not to enable.
BIT3:for 4 th axis, 1 means to enable 4th axis backlash compensation function; 0
means not to enable.
118 FLAG OF BACKLASH DIRECTION
Range: 0 ~ 63
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description BIT0:for setting X axis, 1 means pitch error compensation starts from –ive
:
direction X axis returns to the reference point; 0 means pitch error
compensation starts toward +ive direction.
BIT1:for setting Y axis, 1 means pitch error compensation starts from –ive
direction Y axis returns to the reference point; 0 means pitch error
compensation starts toward +ive direction.
BIT2:for setting Z axis, 1 means pitch error compensation starts from –ive
direction Z axis returns to the reference point; 0 means pitch error
204 LNC Technology Co., Ltd.