LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
41 G00 LINEAR INTERPOLATION
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 1
value:
Unit: Nul
Description
:
0:for G00 command, each servo axis will move by its setting G00 speed, NOT
to do compensation motion simultaneously.
1:for G00 command, each servo does compensation motion simultaneously,
the valid range is as following:
a. G00 commands in MEM and/or MDI modes
b. Same G00 motion commands under MEM and/or MDI modes, such
as G27 ~ G30、G53;
c. G00 and G53 commands of PMC axis function
Final Pt.
Y
Starting pt.
X
Tool
Z
Parameter 0041 setting value is 0
Final Pt.
Y
Starting pt.
X
Tool
Z
Parameter 0041setting value is 1
42 COMMENT TYPE 0:/*...*/ 1:(...)
Range: 0 ~ 1
Active: Active After RESET
228 LNC Technology Co., Ltd.