LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
361 BLACK COLOR SET(0~16)
362 BLUE COLOR SET(0~16)
363 GREEN COLOR SET(0~16)
364 CYAN COLOR SET(0~16)
365 RED COLOR SET(0~16)
366 MAGENTA COLOR SET(0~16)
367 BROWN COLOR SET(0~16)
368 WHITE COLOR SET(0~16)
369 GRAY COLOR SET(0~16)
370 LIGHTBLUE COLOR SET(0~16)
371 LIGHTGREEN COLOR SET(0~16)
372 LIGHTCYAN COLOR SET(0~16)
373 LIGHTRED COLOR SET(0~16)
374 LIGHTMAGENTA COLOR SET(0~16)
375 YELLOW COLOR SET(0~16)
376 LIGHTWHITE COLOR SET(0~16)
377 CURSOR COLOR SET(0~16)
378 MARK COLOR SET(0~16)
379 UP EDGE COLOR SET(0~16)
380 DOWN EDGE COLOR SET(0~16)
Range: 0 ~ 16
Active: Active After Reboot
Level: User
Default 0
value:
Unit: Nul
Description
:
Only valid when parameter No. 0360 is set to 3.
0:Not applied.
1~16:Applied and change to the selected color.
394 THE SCREEN SAVER WAIT TIME
Range: 0 ~ 9999
Active: Active After Reboot
Level: User
Default 0
value:
Unit: Nul
Description 1. When the parameter is set to 0, the screensaver is not applied.
2.
:
When the parameter is not 0, the screensaver activates automatically after
the system is not operated for a specified amount of time (time length set
by the parameter). If screensaver has not activated and some key is
pressed, wait time will be counted from the last keystroke. If screensaver
already activates, pressing any key will immediately terminate it, and wait
time will be counted from zero.
248 LNC Technology Co., Ltd.