LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
140 DISABLE RESET COMMON VAR CLR
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 1
value:
Unit: Nul
Description there are 500 command variables and all level programs share these common
:
variables. The default value is VACANT for common variables @1 ~ @400
when rebooting. But, whether or not clear means VACANT is decided by this
parameter when press RESET. For common
variables @401 ~ @500, remaining as the original value after pressing RESET
key and also remaining power-discontinue memory. @0 means VACANT
permanently.
141 DISABLE RESET GLOBAL VAR CLR
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 0
value:
Unit: Nul
Description there are 33 local variables and program in each level program has its own 33
:
local variables. Only need to end that level program to clear local variables of
that level. Since pressing RESET key will return back to the main program level,
the content of local variables in the main program level will use this parameter
to set whether or not to clear when pressing RESET. If rebooting, local variables
will be cleared no matter in which local level. #0 means VANCANT permanently.
142 ABS/RLT ROTATION COMMAND
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 0
value:
Unit: Nul
Description
:
0:absolute value
1:incremental value
please refer to program manual for a full detailed description.
143 CODE FOR SCALING
Range: 0 ~ 1
Active: Active After RESET
Level: User
236 LNC Technology Co., Ltd.