LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
817 SPIKE -X CMP DELAY
827 SPIKE -Y CMP DELAY
833 SPIKE -Z CMP DELAY
Range: 0 ~ 200
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
Please check the controller’s actual disconnecting time interval first and then set
the value. Assumed doing canned cycle testing. Delay time interval between the
spike point of X axis -ive direction and the direction changing point.
1018 COMP DIST OF EACH SECTION.X
1019 COMP DIST OF EACH SECTION.Y
1020 COMP DIST OF EACH SECTION.Z
1021 COMP DIST OF EACH SECTION.A
Range: 0 ~ 99999999
Active: Active After Reboot
Level: Machinery Builder
Default 30000
value:
Unit: um
Description
:
Assumed pitch error compensation interval is 10000μm of every X axis section,
so please set this parameter to 1000.
LNC Technology Co., Ltd. 211