LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
813 SPIKE +X CMP TIME
819 SPIKE +Y CMP TIME
829 SPIKE +Z CMP TIME
Range: 0 ~ 200
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
Please check the controller’s actual disconnecting time interval first and then set
the desired value. Assumed doing circular testing. When set the spike time
interval to 0, it means NOT to enable the spike compensation function of +ive
X-axis direction.
814 SPIKE +X CMP DELAY
820 SPIKE +Y CMP DELAY
830 SPIKE +Z CMP DELAY
Range: 0 ~ 200
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
Please check the controller’s actual disconnecting time interval first and then set
the value. Assumed doing circular testing. Delay time interval between the spike
point of +ive X-axis direction and the direction changing point.
LNC Technology Co., Ltd. 209