LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
1183 OFFSET LINEAR SCALE OF X AXIS
1184 OFFSET LINEAR SCALE OF Y AXIS
1185 OFFSET LINEAR SCALE OF Z AXIS
1186 OFFSET LINEAR SCALE OF 4TH AXIS
Range: 0 ~ 99999999
Active: Active After RESET
Level: Machinery Builder
Default 0
value:
Unit: um
Description
:
This parameter is only applicable to Heidenhain’s linear scale with multiple
reference marks. To change the set value of this parameter, please press
RESET first and execute zero return manually again. By measuring 2 or 3
signal intervals of the linear scale, NC can detect instantly the relative position
between each axis’s current position and the linear scale’s zero point. If the two
positions do not match each other, the shift between them must be defined by
setting this parameter.
226 LNC Technology Co., Ltd.