LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
10 G00 X ACC/DEC TIME
11 G00 Y ACC/DEC TIME
12 G00 Z ACC/DEC TIME
13 G00 4TH ACC/DEC TIME
Range: 3 ~ 1500
Active: Active After Reboot
Level: Machinery Builder
Default 230
value:
Unit: ms
Description
:
This parameter is to set the acceleration/deceleration time of G00 on X-axis.
The smaller this parameter is, the faster the X-axis reaches the specified speed;
vibration, however, would be more indispensable. In 486IPC version (the IPO is
5ms), the max. value is 2000; in 586IPC version (the IPO is 3ms), the max.
value is 1500.
If the set value exceeds the above limit, the 【MOT 4031 set error in X-axis G00
acceleration/deceleration (parameter #0010) 】 warning message will be
stimulated.
154 LNC Technology Co., Ltd.