LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
108 MORTOR GAINS.X
109 MORTOR GAINS.Y
110 MORTOR GAINS.Z
111 MORTOR GAINS.4TH
Range: 1 ~ 20000
Active: Active After Reboot
Level: Machinery Builder
Default 200
value:
Unit: RPM/1V
Description
:
using this parameter to set the corresponding rotational speed (RPM) when the
X axis motor entry voltage is 1V. When the entry voltage is 10V, the X axis
motor rotational speed is 2000RPM, which means the parameter setting value is
200. This parameter is effective only when X axis control method is V
COMMAND (Setting value of Parameter 0156 is 3).
LNC Technology Co., Ltd. 159