LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
Default
value:
Unit:
0
um
Description:Assumed each axis moves N distance toward machine reference point. Setting
this parameter to N if want to get the offset amount of N distance (um). Different
setting value will change the reference point due to different offset amount. But,
this setting value will NOT change the display coordinate after returning home.
When the setting value is positive, it makes the machine home point of this axis
moves away from DOG direction.
When the setting value is positive, it makes the machine home point of this axis
moves close to DOG direction.
34 PAUSE TIME.X HOME SERACHING
35 PAUSE TIME.Y HOME SERACHING
36 PAUSE TIME.Z HOME SERACHING
37 PAUSE TIME.4 HOME SERACHING
Range: 100 ~ 2000
Active: Active After RESET
Level: Machinery Builder
Default 100
value:
Unit: 10 ms
Description:the required dwell time that is set by this parameter can be used in the following
three places:
a. dwell time of decelerating stop when X axis moves toward the reference
point in 1 st speed and reaches DOG.
b. dwell time of decelerating stop when X axis gets away from DOG in 2 nd
speed and finds motor INDEX.
c. dwell time of decelerating stop when X axis returns back the desired motor
INDEX position.
48 DIRECT SET HOME POSITION
Range: 0 ~ 63
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description:BIT 0: Setting 0 to indicate X axis re-searching HOME point method is
re-searching DOG+ Index. 1 to indicate X axis re-searching HOME point
method is force setting.
BIT 1: Setting 0 to indicate Y axis re-searching HOME point method is
re-searching DOG+ Index. 1 to indicate Y axis re-searching HOME point
method is force setting.
BIT 2: Setting 0 to indicate Z axis re-searching HOME point method is
re-searching DOG+ Index. 1 to indicate Z axis re-searching HOME point
method is force setting.
BIT 3: Setting 0 to indicate the 4 th axis re-searching HOME point method is
re-searching DOG+ Index. 1 to indicate the 4 th axis re-searching HOME point
214 LNC Technology Co., Ltd.