LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
1118 ENABLE INDEX PROTECTED FUNCTION
Range: 0 ~ 1
Active: Active After RESET
Level: User
Default 0
value:
Unit: Nul
Description:When the distance between the 1 st index and limit switch is less than 1/5 or
more than 4/5 revolution of the encoder, grid protection function will activate so
the next index mark will be used to make the distance between the 1 st index and
limit switch over 1/2 revolution of the encoder if the distance in-between is less
than 1/2 revolution. This function ensures that the zero point is always the
original one.
1171 SPACE1 LINEAR SCALE OF X AXIS
1172 SPACE2 LINEAR SCALE OF X AXIS
1173 SPACE1 LINEAR SCALE OF Y AXIS
1174 SPACE2 LINEAR SCALE OF Y AXIS
1175 SPACE1 LINEAR SCALE OF Z AXIS
1176 SPACE2 LINEAR SCALE OF Z AXIS
1177 SPACE1 LINEAR SCALE OF 4TH AXIS
1178 SPACE2 LINEAR SCALE OF 4TH AXIS
Range: 0 ~ 99999999
Active: Active After Reboot
Level: Machinery Builder
Default 20020
value:
Unit: um
Description:This parameter is only applicable to Heidenhain’s linear scale with multiple
reference marks. For the setting method, please go to the figure below for
reference.
10.02
9.98
10.04
9.96
Parameter No. 1171
Parameter No. 1172
Unit:mm
LNC Technology Co., Ltd. 225