LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Parameter
800 RANGE.X FOR EXACT REACH
801 RANGE.Y FOR EXACT REACH
802 RANGE.Z FOR EXACT REACH
803 RANGE.4TH FOR EXACT REACH
Range: 1 ~ 20000
Active: Active After RESET
Level: Machinery Builder
Default 500
value:
Unit: um
Description This parameter is to set the bound value of in-position check window of X axis
:
when G00 exact stop is enabled. (Please refer to parameter # 0043). When |
X-axis command position – X-axis axis actual position | ≦ parameter set value,
X-axis has accomplished G00 exact stop.
845 X AXIS LINEAR/ROTARY TYPE
846 Y AXIS LINEAR/ROTARY TYPE
847 Z AXIS LINEAR/ROTARY TYPE
Range: 0 ~ 1
Active: Active After Reboot
Level: Machinery Builder
Default 0
value:
Unit: Nul
Description:0:Linear axis is set for X axis and ball screw pitch is set according to actual
value.
1:Rotary axis is set for X axis and ball screw pitch is set to 360 o .
166 LNC Technology Co., Ltd.