LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
SYSTEM ALARM and WARNING
MOT 4055:SPD SERROLAG OVER LIMIT IN RT
(1) Please check whether or not ladder has error.
(2) Please check whether or to the spindle is rotating in rigid tapping procedure. If
not, please check whether or not there is problem for the spindle driver setting.
(3) Please check whether or not the spindle Encoder line is discount or fall.
(4) Please check whether or not the setting of Parameter 1075 is too small.
MOT
MOT
MOT
MOT
MOT
MOT
MOT
MOT
MOT
MOT
MOT
MOT
4056:SET PAR 18 ERROR
4057:SPINDLE SPEED CAN'T ARRIVE
4058:OVER SOFTLIMIT
4061:THREAD CUT FEED OVERLIMIT
4062:X-AXIS ABSOLUTE ENCODER VALUE OUT OF TOLERANCE
4063:X AXIS ABSOLUTE ENCODER TRANSMISSION OVER TIME
4064:X AXIS ABSOLUTE ENCODER CHECK SΜM ERROR
4065:Y-AXIS ABSOLUTE ENCODER VALUE OUT OF TOLERANCE
4066:Y AXIS ABSOLUTE ENCODER TRANSMISSION OVER TIME
4067:Y AXIS ABSOLUTE ENCODER CHECK SΜM ERROR
4068:Z-AXIS ABSOLUTE ENCODER VALUE OUT OF TOLERANCE
4069:Z AXIS ABSOLUTE ENCODER TRANSMISSION OVER TIME
MOT
MOT
MOT
MOT
4070:Z AXIS ABSOLUTE ENCODER CHECK SΜM ERROR
4071:4TH-AXIS ABSOLUTE ENCODER VALUE OUT OF TOLERANCE
4072:4TH AXIS ABSOLUTE ENCODER TRANSMISSION OVER TIME
4073:4TH AXIS ABSOLUTE ENCODER CHECK SΜM ERROR
MOT 4074:M CODE REPEAT ASSIGN,CHECK PARAMETER 89,835,836,837
276 LNC Technology Co., Ltd.