LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Hardware Maintenance
A
C
B
REL 2840 figure 2
A:44 PIN D-SUB high definition connecter(F) 20 IN / 16 OUT to I/O card.
B:5.08mm pluggable type terminal blocks 1, output spot outward connect terminal.
C:5.08mm pluggable type terminal blocks 2, input spot outward connect terminal.
Note 1:The pluggable type terminal block of C provides the 20 0 Vses and 20 adapters
and inputs to click the concert usage.
Note 2:Each relay has it to should red LED, relay after arousing the magnetic belt and
workings because of the output spot, the LED will click then bright, the debugging
of available this progress relay and output spot uses.
72 LNC Technology Co., Ltd.