LNC-M600 Leading Numerical Controller Maintenance Manual

LNC-M600
Appendix B: Servo Connection Example
Parameter Function Setting Range Note
Electronic thermal protective characteristic selection
Set Value Overload Overload stall
protection
0 O ×
OLN O 1 Standard
O O
2 motor
× ×
3
× O
4 O ×
5 VF motor
O O
6 (special
× ×
7
motor)
× O
Setting
Parameter
Function
Setting Value
Range
Sr1 ~Sr7 Preset-speed operation frequencies 0 ~ 30% Depends on capacity
This parameter can set 15 kinds of default speed. The first seven sections are set in S1 ~
S7 and the last eight sections are set in F287~F294. The requirements, such as
acc/deceleration, direction and so on) can be modified in F380 ~ F394. Also, when doing
multiple-speed testing, CNOD and FNOD must be modified in order for this function to be
effective. Please refer E28 ~E30 for a detailed description.
Please notice that this value is a frequency multiplier value, not actual rotational speed.
Preset-speed
Note
Terminal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
S1 - CC O -- O -- O -- O -- O -- O -- O -- O
S2 - CC -- O O -- -- O O -- -- O O -- -- O O
S3 - CC -- -- -- O O O O -- -- -- -- O O O O
S4 - CC -- -- -- -- -- -- -- O O O O O O O O
LNC Technology Co., Ltd. 331